|
|
|
|
|
|
|
|
|
|
|
High Collar Lock Washer to be used with 44972 extended rotor pin
|
5/16 Spring Lock Washer
|
5/16-18 Flange Nut
|
|
|
|
|
|
|
|
|
|
|
|
|
Master Cylinder roll pin handle stop
|
AN washer 5/8" to be used with the axle nut and as a spacer between the 5/8" caliper and 5/8" Hub assembly
|
Woodruff key
|
|
|
|
|
|
|
|
|
|
|
|
|
5/16-18 x 1 Zinc Plated Cap Screw Bolt
|
AN washer 3/4" to be used with the axle nut for the BX1500 kits
|
1/4-20 x 1/2" SHCS extended rotor pin to be used with 44989 locking collar.
|
|
|
|
|
|
|
|
|
|
|
|
|
1/8" NPT Master Cylinder Plug
|
5/16-18 Stainless Steel Set Screw (Old part number 51035)
|
1/4" NPT Reservoir Plug
|
|
|
|
|
|
|
|
|
|
|
|
|
Caliper Quad Ring Seal
|
Master Cylinder Stick Clamp Bolt
|
Replacement o-ring for master cylinder
|
|
|
|
|
|
|
|
|
|
|
|
|
Axle nut 5/8"-11 15/16"W x 25/64"H Nylock
|
Axle nut 3/4-10 nylock nut for 3/4" Black Max Axle
|
1/4-28 x 3/8" Steel Set Screw with Nylon Flat Tip. Bleeder Screw Plug.
|
|
|
|
|
|
|
|
|
|
|
|
|
Replacement Ferrel for the 1/8" Tube Straight Compression Fitting #44756
|
Master Cylinder Cup Seal Washer
|
Replacement Nut for the 1/8" Tube Tee Compression Fitting #44769. The ferrule is built in.
|
|
|
|
|
|
|
|
|
|
|
|
|
1/8" Aluminum hub spacer. To be used with 14326 and 14327 wheel when used with the Black Max Brakes.
|
Master Cylinder Foam Handle Grip
|
1/4" NPT Master Cylinder Vent Plug with filter
|
|
|
|
|
|
|
|
|
|
|
|
|
Master Cylinder Return Spring
|
1/4-28 Caliper Bleeder Screw
|
Master Cylinder Handle Shoulder Bolt
|
|
|
|
|
|
|
|
|
|
|
|
|
Replacement bearing for the 44772 Hub 5/8" axle size
|
3/4" Hub Spacer. Goes between the caliper and hub for the 3/4" brake kits. .751"ID x .525" Long
|
1/8" O.D. X .078" I.D. tube Nylon tubing Brake Line. (Available in 14', 20', & 100' Rolls)
(When replacing line make sure to order a 44823 replacement ferrel for the straight or elbow compression fitting and the 44859 nut for the tee)
|
|